====== Installationsanleitung für Kobil Kaan Base unter Gentoo (64Bit) =====

Vielen Dank an Stephan für die Anleitung

==== PC/SC und CCID installieren ====

  $> emerge =pcsc-lite-1.4.2 =ccid-1.3.1

==== PC/SC testen ====

  $> ls /usr/lib/*pcsc*
  lrwxrwxrwx 1 root root    20  5. Jan 22:46 libpcsclite.so -> libpcsclite.so.1.0.0
  lrwxrwxrwx 1 root root    20  5. Jan 22:46 libpcsclite.so.1 -> libpcsclite.so.1.0.0
  -rwxr-xr-x 1 root root 47568  5. Jan 22:46 libpcsclite.so.1.0.0

  $> xterm -e 'pcscd -f -a -d' &
  pcscdaemon.c:297:main() pcscd set to foreground with debug send to stderr
  debuglog.c:242:DebugLogSetCategory() Debug options: APDU
  debuglog.c:213:DebugLogSetLevel() debug level=debug
  pcscdaemon.c:500:main() pcsc-lite 1.4.2 daemon ready.
  pcscdaemon.c:559:signal_reload() Reload serial configuration
  hotplug_libusb.c:454:HPAddHotPluggable() Adding USB device: 002:006
  readerfactory.c:1113:RFInitializeReader() Attempting startup of KOBIL KAAN Base (E_043100498) 00 00 using /usr/lib64/readers/usb/ifd-ccid.bundle/Contents/Linux/libccid.so.1.3.1
  readerfactory.c:980:RFBindFunctions() Loading IFD Handler 3.0
  ifdhandler.c:1239:init_driver() LogLevel: 0x0003
  ifdhandler.c:1249:init_driver() DriverOptions: 0x0000
  ifdhandler.c:77:IFDHCreateChannelByName() lun: 0, usb:0d46/3001:libusb:002:006
  ccid_usb.c:233:OpenUSBByName() Manufacturer: Ludovic Rousseau (ludovic.rousseau@free.fr)
  ccid_usb.c:243:OpenUSBByName() ProductString: Generic CCID driver v1.3.1
  ccid_usb.c:249:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version.
  ccid_usb.c:397:OpenUSBByName() Found Vendor/Product: 0D46/3001 (KOBIL KAAN Base)
  ccid_usb.c:399:OpenUSBByName() Using USB bus/device: 002/006
  ccid_usb.c:759:get_data_rates() Wrong GET DATA RATES size: 1
  ifdhandler.c:271:IFDHGetCapabilities() lun: 0, tag: 0xFAE
  ifdhandler.c:313:IFDHGetCapabilities() Reader supports 1 slot(s)
  pcscdaemon.c:571:signal_reload() End reload serial configuration
  pcscdaemon.c:559:signal_reload() Reload serial configuration
  pcscdaemon.c:571:signal_reload() End reload serial configuration
  ifdhandler.c:841:IFDHPowerICC() lun: 0, action: PowerUp
  eventhandler.c:431:EHStatusHandlerThread() Card inserted into KOBIL KAAN Base (E_043100498) 00 00
  Card ATR: 3B FF 18 00 FF 81 31 3C 45 65 63 0D 02 31 02 50 00 10 90 55 70 00 04 10 0A

==== UDEV Rule modifizieren ====

/etc/udev/rules.d/60-pcscd_ccid.rules

  # udev rules for pcscd and CCID readers
  # If not adding the device, go away
  ACTION!="add", GOTO="pcscd_ccid_rules_end"
  # generic CCID device
  SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="0b", RUN+="/usr/sbin/pcscd --hotplug"
  
  # Kobil KAAN Base
  BUS=="usb", SYSFS{idVendor}=="0d46", SYSFS{idProduct}=="3001", GROUP="usb", MODE="0664", RUN+="/usr/sbin/pcscd --hotplug"
  
  # All done
  LABEL="pcscd_ccid_rules_end"


==== USB für den Benutzer freigeben ====

  $> adduser leinky usb

==== CT-API Kobil Bibliothek installieren ====

  $> mkdir ~/kobil
  $> cd ~/kobil
  $> wget http://www.kobil.de/fileadmin/download/support/download/driver/ct-linux.zip
  $> unzip ct-linux.zip
  $> cd ct-linux64
  $> file libct.so
  libct.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), not stripped
  $> ldd libct.so
  linux-vdso.so.1 =>  (0x00007fff907fe000)
  libpthread.so.0 => /lib/libpthread.so.0 (0x00007ff288404000)
  libdl.so.2 => /lib/libdl.so.2 (0x00007ff288200000)
  libc.so.6 => /lib/libc.so.6 (0x00007ff287ec0000)
  /lib64/ld-linux-x86-64.so.2 (0x00007ff2887e0000)
  
  $> cp libct.so /lib64/.
  $> chmod 755 libct.so
  
  $> ls -lh /lib64/libct.so
  -rwxr-xr-x 1 root root 184K 11. Aug 16:00 libct.so

==== CT-API konfigurieren ====

Folgende Datei in den Homebereich jedes Nutzers kopieren, der den Kartenleser nutzen möchte.

~/.CT_devices

  GetPortType=#0
  SetPortType=#0
  DefaultPortType=#0
  DefaultProtocollType=#0
  UseOnlyDefaultProtocoll=#0
  B1DTRLow=#50
  B1DSRRespActive=#2000
  PnPChar=#150
  B1WaitForPnPString=#1500
  KaanWaitForPnPString=#600
  LogLevel=#0
  LogfileName=~/ctapilog.log
  Port1=PCSC;KOBIL KAAN Base (E_043100498) 00 00;3;0;KAAN Base USB over PCSC
  UseOldStyleManufacturerDataObject=#0
  AdaptInsertionPosition=#1
  AdaptPIN2Block=#1


==== CT-API testen ====

  $> ./cardping -b1
  Going to call CT_init
  CT_init (Port 1): 0
  CT_Reset: 0

  $> ./cardping -b1 20100101
  Going to call CT_init
  CT_init (Port 1): 0
  CT_Reset: 0
  CT_data Aufruf mit: 20 10 01 01
  CT_data: 0
  Antwort: 3B FF 18 00 FF 81 31 3C 45 65 63 0D 02 31 02 50 00 10 90 55 70 00 04 10 0A 90 01

==== Hibiscus installieren ====

  $> cd ~
  $> wget http://www.willuhn.de/projects/jameica/releases/1.7/jameica/jameica-linux-amd64.zip
  $> unzip jameica-linux-amd64.zip
  $> rm jameica-linux-amd64.zip
  $> cd jameica/plugins
  $> wget http://www.willuhn.de/projects/hibiscus/releases/1.9/hibiscus/hibiscus.zip
  $> unzip hibiscus.zip
  $> rm hibiscus.zip

==== Kartenleser in Hibiscus konfigurieren ====

  Falls pcscd noch nicht läuft:

  $> su -c '/etc/init.d/pcscd start'

  $> ~/jameica/jameica-amd64.sh


Eigenschaften des Chipkartenlesers (DDV):

| Port des Lesers              | COM2/USB2 |
| CTAPI Treiber                | /lib64/libct.so |
| Index des Lesers             | 0 |
| Index des HBCI Zugangs       | 1 |
| HBCI Version                 | FinTS 3.0 |
| Tastertur des PCs verwenden  | ja |